Silicon TechnoLabs RS485 to TTL and Vice Versa Auto-Directional Converter

Features

• Ground Output for wire shielding. Transceiver Facility (Automatic Switching between Transmit/Receive mode of RS485). Twisted pair cable can work up to 1. 2 Km distance. Supports point-to-multipoint, this converter can connect up to 32 RS485 interface device. On board 3 Pin 5. 08 mm pitch screw terminal to facilitate RS-485 communication wiring. Termination Resister Jumper provides option to use in Multi Drop RS485 network. Four mounting holes 3. 0 mm for easy mounting
• Can have up to 32 devices on the bus. Supports multiple units on the same bus (Multi-Drop)
• Operating Voltage: +5V. With on board RED LED power indication. RS485 I/O: D+, D-, Ground. 3. TTL I/O: TX, RX
• Built in terminal resistor of 100R Ohm. 2. Maximum distance between end-nodes is 1200m. Cable Type preferred for long rang RS485 communication: - Two core, Twisted Pair Shielded type. D+ and D- should be twisted with each other to get optimal range